KRAUS Air Technologies® is a proud distributor of Kraus Natural Gas Fuel Stations
A typical skid-mounted assembly consists of an Ariel four stage compressor delivering a maximum flow rate of 230 SCFM and three vessels with a storage capacity of 39,000 SCF. The entire assembly is a self-contained, outdoors installation utilized for storing and delivering natural gas for vehicle refueling. SPECIFICATIONS & PERFORMANCE DATA (typical Air Technologies-installed NGV Fueling Station Package) Compressor & Storage Skid: Compressor & Engine: Ariel JGP/2/4G compressor with Caterpillar 3304NA engine, 95 BHP @ 1800 RPM Maximum Discharge Pressure: 5,000 PSIG Inlet Pressure Range: 25-65 PSIG Nominal Flow Rate: 100-230 SCFM @ 5,000 PSIG Dimensions (L x W x H): 25' x 13' x 11' Weight: 35,000 lbs. Noise: 80 dbA nom. @ 3 ft. Ambient Temperature Rating: -20 degrees F to +105 degrees F Dryer: Xebec single tower dryer Storage Capacity: 39,000 SCF @ 5,000 PSIG Storage Vessels: Three (3) CPI tubes, ASME rated, 20" DIA. X 23' L, 13,000 SCF ea. Communications: Modem output for surveillance and control Dispenser Unit Dispenser: Kraus DAM-3CH dispenser with 3,600 & 3,000 PSIG NGV1 nozzles Maximum Discharge Pressure: 3,600 PSIG Maximum Inlet Pressure: 5,000 PSIG Maximum Flow Rate: 1,000 SCFM Dimensions (L x W x H): 3' x 1.5' x 8' Weight: 300 lbs. For sales or equipment information, contact us at one of our locations or e-mail us using the link below. Disclaimer: Equipment descriptions, images, and claims are taken from sales brochures provided by the respective companies to Air Technologies® to be used in marketing their products. These descriptions, images, and claims may be outdated, incorrect, or no longer applicable. They should be used strictly as guidelines and examples of product lines which these companies currently produce or have produced in the past. Air Technologies® will attempt to correct any incorrect or outdated information as it is discovered. Air Technologies® claims no responsibility for erroneous information. To verify claims, check on product availability, or get up to date information, please contact Air Technologies®. [ back to top ]
|




