A proud distributor of

Discover the Air Technologies^® Advantage!
Engineered drying and filtration systems are exclusively available through Air Technologies^®

BLOWER PURGE DESICCANT COMPRESSED AIR DRYERS PRODUCE 100% EFFICIENT AIR SYSTEMS!

For decades, compressed air users have relied on Air Technologies® to design and engineer energy efficient compressed air systems. Now with the engineering specialists of Pneumatic Products, Air Technologies® offers a series of dryers and filtration systems that reduces the cost of operation and improves the reliability of air driven processes.

The guarantee that comes from Pneumatic Products superior state-of-the-art components yields the most energy efficient and reliable dryer in today’s competitive market.

WHY WAIT?

• Design for your desired dew point
• Operate continuously at maximum rated flow (100% duty cycle)
• Operate at CAGI ADF 200 inlet standards of 100 degrees F inlet temperature
• Operate at 100% relative humidity at 100 psig

HERE IS HOW IT WORKS

Image your filtered compressed air entering on-line desiccant-filled, drying Tower 1 through valve (A). Up-flow drying enables the desiccant to strip moisture from the air stream. Your clean, dry compressed air exits through (E) to feed the air system. Tower 2 (shown in regeneration mode) valve (B) closed, depressurizes to atmosphere through muffler (C). Valves (D&F) open and the heater turns on. The high-efficiency blower draws ambient air and feeds it through the heater. The ambient air stream passes through valve (F) and flows downward through the moist desiccant in Tower 2, collecting water vapor before exiting valve (D). Once the desiccant is fully desorbed, the heater turns off. Valve (D) closes and Tower 2 is repressurized. At a fixed time interval, valve (B) will open and Tower 2 will be placed on-line to dry the air stream and valve (A) will close. Operations will switch and Tower 1 will be regenerated.

Simply contact us at the location near you or e-mail us for more information.

Disclaimer: Equipment descriptions, images, and claims are taken from sales brochures provided by the respective companies to Air Technologies® to be used in marketing their products. These descriptions, images, and claims may be outdated, incorrect, or no longer applicable. They should be used strictly as guidelines and examples of product lines which these companies currently produce or have produced in the past. Air Technologies® will attempt to correct any incorrect or outdated information as it is discovered. Air Technologies® claims no responsibility for erroneous information. To verify claims, check on product availability, or get up to date information, please contact Air Technologies®.

[ back to top ]

[ back to PPC Dryer Selection ]